Feb 16, 2013 | @UR, Printing
Although I ran a few small successful tests, this print job was meant to test quality for larer prints. You may notice a couple small objects printed in the back. Overall, the three objects filled about 6″x6″ on the platform for a good test. However, a...
Feb 14, 2013 | @UR, Printing
We have really had a tough time getting things to stick on the build platform for the SD3. I had it working well enough for two class demonstrations, but I was printing short items and had the z-level set really low so the extruder was really pushing the plastic...
Feb 8, 2013 | @UR, Design, Printing, SketchUp
Want a custom 3D-printed “I ♥ [Heart] TLC” magnet? While supplies last, the TLC will be giving them away for those coming to the Technology Learning Center on Valentine’s Day to work on their academic projects.
Feb 8, 2013 | @UR, Design, Printing, SketchUp
Although there is nothing toxic about 3D printing with ABS (check out an MSDS for ABS and research posts such as http://www.instructables.com/id/Is-3D-Printing-Safe-or-DIY-Testing-for-HCN-from-/ ), it does have some odor. The magnitude can be reduced by enclosing the...
Feb 4, 2013 | @UR, Printing
After setting up the printer using Solidoodle’s settings for Repetier , I proceeded to level the build platform, test its flatness, and proceed to the first test print. The platform was found to be about 0.04″ (~1mm) out of level. Once leveled, one...
Feb 2, 2013 | @UR, Printing
I gotta hand it to Solidoodle. They have really upped their game for getting down to the 8-10 week order lead time. I ordered the Solidoodle on November 23, and it arrived on February 1. In fact, it showed up within 12 hours of when I received the shipping notice....
