Custom Microscope Stage for Physics

Here is a time lapse video from the Ultimaker’s internal camera for the print of a custom stage for a microscope with Professor Christine Helms in the Physics Department.

Professor Helms created the initial design in COMSOL Multiphysics while some tweaks were later done in Sketchup.  The printing was done using Cura software with 6 shells, 1.2mm top and bottom, 80% infill, and support structures for three overhangs.  It took approximately 800g filament and over 2 days to print.

This entry was posted in Design, Printing, SketchUp, Uncategorized. Bookmark the permalink.